Zhangjiagang Sunstar Machinery Co., LTD.

Zhangjiagang Sunstar Machinery Co., LTD.
Products

4 Cavity Automatic Plastic Bottle Making Machine

4 Cavity Automatic Plastic Bottle Making Machine 4 Cavity Automatic Plastic Bottle Making Machine

Product name:4 Cavity Automatic Plastic Bottle Making Machine

Details:

Bottle making machine, plastic bottle making machine, automatic bottle making machine, automatic plastic bottle making machine
4 Cavity Automatic Plastic Bottle Making Machine---automatic plastic bottle making machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: automatic and manual.
10). Safe\reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low cost\high efficiency\easy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). Easy for you to install\test and start up.
14). Low rejection rate: less than 0.2 percent.

Technical parameter:
Model
SS-A4
Productivity
Depend on bottle design
3200-4000PCS/H
Product type
Body diameter
20mm-100mm
Height
50mm-310mm
Neck diameter
15mm-38mm
Mold
Cavity
4cavities
Mold thick
240mm
Mold
500*500mm
Main machine power
Electrical source power
380v 3Phase /220v 3Phase  50/60HZ
Rated Power
49kw
Really use power
14kw
Air source
LP air compressor
1.6m3/min 1.0MPa 1set (15KW)
HP air compressor
1.0m3/min 3.0MPa 2sets (each set 11KW)
Air dryer
2.0m3/min 3.0MPa 1set
Cooling water
Cooling water
15L/min
Size
L*W*H
1908*1858*1920mm
Weight
3600kg
Auxiliary equipment(preform unscrambler)
L*W*H
276*106*186mm
Weight
250kg
Resin available
 
PET

←[Previous:] [Next:]→

Related Products :

Automatic PET Can/Wide Mouth Bottle Making Machine


Automatic PET Can/Wide Mouth Bottle Making Machine

2 Cavity Automatic Bottle Blowing Machine


2 Cavity Automatic Bottle Blowing Machine

PET Preform Mould


PET Preform Mould

Automatic Bottle Extrusion Blowing Machine


Automatic Bottle Extrusion Blowing Machine

PP/ PC/ PE Bottle Automatic Making Machine


PP/ PC/ PE Bottle Automatic Making Machine

Semi-automatic Bottle Blowing Machine


Semi-automatic Bottle Blowing Machine

Injection Blowing Machine


Injection Blowing Machine

5 gallon bottle mould


5 gallon bottle mould
Goolge  
Home   |    About Us   |    Products   |    News   |    Feedback   |    Contact Us   |    Service   |    SiteMap
Copyright (c) 2016 Zhangjiagang Sunstar Machinery Co., LTD. All Rights Reserved

Chinese professional manufacturer of beverage filling and packing machine

beverage machine, beverage packaging machinery, beverage filling and packing machine, water filling machine, bottle filling machine, juice tea filling machine, beer filling machine, pop can filling and packing machine, oil filler